Eyes-HVAC-Wave
It is a device that can detect air conditioners that work actively in closed ranges with mm wave (increase high frequency) technology 8 meters and 12 meters distance motion detection technology when there is no person, turn off the abilities of the person in time intervals, pay attention to its economical price, and save between 10% and 20% on electricity. is the device.
It can scan 180 degrees if the device is mounted at a height of 2 meters from the ground, and 360 degrees if it is mounted on the ceiling. The Eyes-HVAC-Wave device works as an alternative to the Eyes-HVAC-Panorimic device for those with imaging anxiety.
After the device is activated, our software detects whether it is alive or moving indoors, that is, the presence/absence of people. With the mm wave sensor and motion sensor used, 100% of the change is scanned. The interior can be scanned up to 12 meters. Even if there is a cloth under or on the table, it is possible to detect its parts from the heartbeat. Even if there is a curtain swinging in the room or a working fan, it can distinguish whether it is alive or not.
In order for the product to work, you need to plug in the Type-C head from the 12V/2A adapter to the Eyes device and the adapter to the nearby socket. During product installation, the lamp on the top of the device should light up red.
Then you have to press and hold the remote control off button on the side of the device for 5 seconds.
The LED on the device starts to flash red, press the ON/OFF button of your air conditioner remote, press and hold it for 5 seconds towards the device.
You can tell your remote copying bits when you see the lamp turn green. You can register the active device in two different ways.
You can stick the device with the double-sided tape that comes out of the box. You can knot it with the screw and dowel that comes out of the box, and attach the device to the screw.
Our product will turn off your air conditioner within the specified time interval only when there is no one in the equipment and will always wait to turn it on from your existing remote control. Your device cannot be turned on by turning off your air conditioner by itself.
Since our eye device draws very low current, being active all the time does not bother you in terms of cost.
Your device does not need internet or Wi-Fi connection.
Our Eyes-HVAC-Wave model pays for itself within 1 year by preventing unnecessary purchases, depending on the activity of the air conditioner used.
Your air conditioner, which is left on at the end of the day or on the weekend, will no longer work. Your air conditioner will not operate unnecessarily when there is no one in it for more than 5, 15, 30 or 45 minutes. There will be no collective responsibility for the connection of air conditioners or between them.
If you want to integrate the existing device with another air conditioner in another room, it will be enough to plug the device into the socket, press the reset button and connect the new remote.
mm wave technology
PIR (Motion) sensors do not work well in human detection systems. It can perceive the movement coming from the next room or the curtain swinging inside as a human. mm wave technology is focused on the live heartbeat indoors and can distinguish external movements.
Long distance motion detection
Classical PIR (Motion) sensor works between 4-5 meters for indoor motion detection. He often makes the wrong decision. With the EKMC160 panasonic sensor used in the device, it can detect human movement at the farthest point with sensitive motion detection technology up to 12 meters.
Autonomous air conditioner shut-off
With indoor people detection, the presence of people is detected in the environment and if there is no person, it prevents the air conditioner from operating unnecessarily. It decides this process according to your preferred shutdown time intervals.
